6" Tri-Hone Sharpening System
Smith's TRI-6 knife sharpener is made with three kinds of stones that ensures the knives get an all-round sharpness. It has two Arkansas stones, both fine and medium, where the Medium Synthetic Stone - 800 Grit, Fine Stone - 1,000 Grit. The third stone is a Coarse Synthetic Stone- 300 Grit.
Knife sharpeners can be dangerous to use if not handled well. To ensure that you have a complete control over your knife, this knife sharpener is based on a molded plastic base with rubber feet for safety.
To maintain the longevity and performance of the knife sharpening surface, it comes with a premium honing solution. And to catch the solution, there is special ‘V’ trough.
Put a small amount of honing solution on your stone. Don't use a lot of lubricant as a small amount goes a long way. Using a natural stone without a lubricant or water will damage and clog your stone. It protects the stone and the cutting edge of the knife or tool by washing away the particle of stone and metal created during the sharpening process. If necessary, water can be used as a substitute.
To insure the proper sharpening angle on your knife, place the yellow Smith's angle guide at the end of your stone. This shows you the proper angle we recommend to use in order to obtain the sharpest edge. Next, place your blade flat on the angle guide at the end of the stone. Now you are ready to begin the sharpening process.
Push the blade away from you just like you are trying to carve a thin slice off the top of the stone. Don't be afraid to use pressure against the stone while sharpening since it will not damage the stone or your knife. Repeat this pushing stroke three or four times. Remember, try to keep the same approximate sharpening angle all the time, since this is the key to obtaining the sharpest edge.
To sharpen the other side of your knife, simply place your blade at the opposite end of your Smith sharpening stone and repeat the above steps, but instead of pushing the knife away from you, pull it towards you. Continue to sharpen until you feel that your blade is truly sharp.
Cleaning your stones will keep the pores free of stone and metal particles. After each use, the Arkansas stones should be cleaned by scrubbing vigorously with water, liquid soap, and a stiff nylon brush.
Features of the Knife Sharpening System:
- 2 Arkansas stones (Fine & Medium) & 1 Coarse synthetic stone
- Stone Size:6” x 1 5/8” x 3/8”Medium Arkansas Stone - 600 Grit, Fine Arkansas Stone- 1,000 Grit, Coarse Synthetic Stone
- Stones Mounted on Rotating Molded Plastic Triangle for Easy Stone Rotation and Identification
- Molded Plastic Base with Nonskid Rubber Feet for Safety
- Sharpening Angle Guide Ensures Correct Angle every time
STOCKED ITEM. Usually available for pickup in our store in Las Vegas, or would ship ASAP. The purchaser is responsible for conforming to all applicable Country, State and Local laws. All items with a combined total of $100.00 or any collectable items (one of a kind) will be shipped with SIGNATURE REQUIRED.